Mô tả
FEATURES & BENEFITS
- Positive displacement, internal gear pumping principle.
- Gear and pump geometry has been optimized based on more than 100 years of experience. These pumps are designed to provide exceptional reliability and freedom from down time and maintenance.
- Drop in foot print allows direct replacement of a Viking Universal Seal pump without re-piping.
- Foot-mounted design.
- Available with 90° ports, which can be rotated in 90° degree increments, or with 180° ports (Check individual sizes).
- Ports are threaded or flanged.
- Pumps come with an adjustable internal pressure relief valve on standard design.
- The pump operates in either direction, allowing one pump to be used for both loading and unloading. There is a slight reduction in capacity at viscosities less than 100 SSU with counter-clockwise rotation.
- Adjustable end clearance for fluid viscosity or temperature by use of head shims.
- Static O-rings at key points assures liquid containment.
- Pumps conforming to ATEX hazard prevention requirements are available
- Short-term Run-dry Capability. Unlike many mag drive pumps, the 8123A series may be run dry for short periods, such as for clear lines when unloading, or in the case of accidental empty tank situations
===========
CAPACITY: 0 to 500 GPM (0 to 114 m3/h)
PRESSURE: to 200 PSI (to 14 Bar)
TEMPERATURE: -60 to +500 °F (-51 to +260 °C)
VISCOSITY: 28 to 250,000 SSU (1 to 55,000 cST)
===========
CÔNG TY TNHH GIẢI PHÁP KỸ THUẬT TÂN LONG
Địa chỉ: 146/18 Nguyen Huu Tho, Phưoc Kien, Nha Be, HCMc, VN
Điện thoại: (+84)-8 3781 5635/36/37
Email: sales@tanlongvietnam.com | contact@tanlongvietnam.com
Website: www.tanlongvietnam.comom
